Cheese Vat
for Cheese Production and Dairy Processing
Triple-jacketed mixers for heating, cooling and mixing milk — available in three versions matched to your production scale: standard, combo, and with a built-in refrigeration unit.
Three Cheese Vat Variants
Margo milk-processing mixers are manufactured in three versions — from a basic setup to an extended one with its own cooling source.
Standard Cheese Vat
A single triple-jacketed tank with a paddle agitator and an inverter for speed control. A basic, reliable solution.
See specification → ComboCombo Cheese Vat
Two triple-jacketed tanks of the same capacity, stacked one above the other — the lower one with its own refrigeration unit. Higher production throughput.
See specification → With Refrigeration UnitVat with Refrigeration Unit
A single tank with a refrigeration unit built into the water jacket — independence from an external cooling source.
See specification →Equipment Built for Daily Work on the Farm and in the Plant
These mixers are designed primarily for milk processing, but can be used anywhere a product needs to be heated, cooled and mixed.
Cheese Vat — Standard Version
A triple-jacketed tank — the inner tank and the heating/cooling jacket are made of acid-resistant steel, grade 304. Water is used as the heating and cooling medium in the jacket. Clad on the outside with brushed stainless steel sheet, grade 304.
- Lid split into two removable parts
- Removable paddle agitator
- Agitator driven by an electric motor with gearbox — 28 rpm
- Agitator can be swung away from the tank for manual curd cutting
- Inverter for agitator speed control
- Heating/cooling water jacket
- Tank insulation made of polyethylene foam
- Bottom profiled toward the outlet
- Heating: 2 stainless steel heaters, 9 kW each
- Built-in circulation pump
- Analog thermometer for product temperature
- Control box with an electronic thermostat
- Outlet at 30 cm height with a butterfly valve
- Four legs with casters
Cheese Vat — Combo Version
This device consists of two triple-jacketed tanks of the same capacity, mounted one above the other. Both tanks are made of acid-resistant steel grade 304, with a polyethylene foam insulation layer, clad on the outside with brushed stainless steel sheet.
Upper Tank
- Split lid: a welded fixed part + a lifting flap
- Frame agitator
- Agitator motor with gearbox — 35 rpm
- Heating/cooling water jacket
- Bottom profiled toward the outlet
- Heating: 2 stainless steel heaters, 6 kW each
- Analog thermometer in the water jacket
- Control box with an electronic thermostat
- Outlet with an SMS 51 butterfly valve in 304 steel, with an elbow
Lower Tank — with Refrigeration Unit
- Split lid: a bolted part + a lifting flap
- Removable frame agitator
- Agitator motor with gearbox — 35 rpm
- Heating/cooling water jacket
- Bottom profiled toward the outlet
- Heating: 2 stainless steel heaters, 6 kW each
- Analog thermometer in the water jacket
- Control box with an electronic thermostat
- Outlet with an SMS 51 butterfly valve in 304 steel, with an elbow
- Refrigeration unit + circulation pump in the water jacket
Cheese Vat with Refrigeration Unit
A triple-jacketed mixer. The product tank and the heating/cooling jacket are made of stainless steel grade 304, clad on the outside with brushed sheet, grade 304. The heating/cooling water jacket is fitted with its own refrigeration unit.
- Split lid: a permanently welded part + a lifting flap
- Frame agitator
- Agitator motor with gearbox — 35 rpm
- Heating/cooling water jacket
- Bottom profiled toward the outlet
- Heating: 2 stainless steel heaters, 6 kW each
- Analog thermometer in the water jacket
- Control box with an electronic thermostat
- Outlet fitted with a 304-steel valve
- Built-in refrigeration unit
- Heat exchanger with a heater port
Not Just Cheese — Anywhere Precise Thermal Processing Matters
Margo cheese vats are designed primarily for milk processing, but they perform well anywhere a product needs to be heated, cooled and mixed — including the food, chemical and pharmaceutical industries.
Need a Cheese Vat?
We design every device individually — capacity, material, heater power and cooling version are selected to match your production process.